Avaya J179 - Activating Call Forwarding; Enabling Call Forwarding When Your Line Is Busy or You Do Not Answer

Note:
You must not enable the SAC feature in case you selected the cover all option for the
coverage path because enabling both features at the same time can cause duplicate entries in
the call log.
Procedure
1. Gain access to the Features screen.
2. Scroll to choose Send All Calls.
3. Press Select or the corresponding line button to activate the feature.
Activating call forwarding
Procedure
1. Gain access to the Features screen.
2. Scroll to choose Call Forward.
3. Press Select or the corresponding line button.
4. Enter the destination number to which you want to forward your calls.
5. Press Enter.
Note:
You can view the call originator when the call forwarding chain has two or more
participants. This feature works if your administrator has configured the related
parameter.
Enabling call forwarding when your line is busy or you do
not answer
About this task
Use this task to set a number to which your calls are forwarded when your line is busy or when
you do not answer a call. You must enter the telephone number where the calls are forwarded
each time you enable this feature.
Procedure
1. From the Phone Screen, gain access to the Features screen.
2. Press Select to choose Call Fwd Busy/No Ans.
3. Enter the number to which you want to forward your calls.
Activating call forwarding
March 2018 Using Avaya J169/J179 IP Phones SIP 79
Comments on this document? infodev@avaya.com