3. In the Address field, enter the IP address of the phone.
4. In the SNMP MIBs list, double-click the PHONEKEYLIST parameter to view its value.
The MIB browser application displays the parameter value in Result Table on the right, in
the Name, Value and Type columns.
Related links
Pre-configuration of keys on page 180
Active call shortcut keys
Active call shortcut keys allow to use Autodial and Contacts keys as shortcuts to perform a
specific action during an active call.
Note:
Using Autodial keys as shortcuts is available only in the Avaya Aura
®
environment.
The following actions call can be specified for these keys:
• Attended call transfer: the phone puts an active call on hold, and the user is able to talk to the
destination (an Autodial user or a contact) first.
• Blind call transfer: an active call is immediately transferred to the destination.
• Conference call: the user can add another user to an active call to set up a conference.
The Active call shortcut keys feature can be configured in either of the following ways:
• by setting the corresponding parameters in the 46xxsettings.txt file
• by assigning shortcut actions to the required keys in the web interface. See
Settings field
descriptions on page 119 for more details.
Related links
Feature and application configuration on page 155
Active call shortcut keys configuration on page 183
Active call shortcut keys configuration
Use the 46xxsettings.txt file to set the following parameters for Active call shortcut keys:
Parameter name
Default value Description
SHORTCUT_ACTION_CONTACT 0 Specify the action performed if the user
presses an Autodial key or selects a
contact on the Phone screen during an
active call.
Valid values:
• 0: the active call is put on hold, and the
destination extension number is dialed.
Table continues…
Feature configuration
July 2019 Installing and Administering Avaya J100 Series IP Phones 183
Comments on this document? infodev@avaya.com
To Next Page
Loading...
