4. 46xxsettings.txt file
5. DHCP.
6. LLDP. There is an exception of LLDP getting a higher precedence than the Settings file
and DHCP when the layer 2 parameters, such as L2QVLAN, L2Q, L2QAUD, L2QVID,
L2QSIG, DSCPAUD, DSCPSIG, DSCPVID, and PHY2VLAN are set through LLDP.
Note:
When parameters of the 46xxsettings.txt file are removed, or are not used, they reset to
their default value.
Diagram: Phone deployment process
Collect configuration data for the following components
DHCP Server
DHCP
Deskphone
Network Server /
Switch (LLDP)
File Server
File Server
2
3
4
5
1
Configure the servers
NTP Server
NTP
NTP Server
NTP
Configure the following servers
DHCP Server
DHCP
Network Server /
Switch (LLDP)
File Server
File Server
User, Session &
Communication Profile
Connect IP Phone
to the network
User, Session &
Communication Profile
Unpack and assemble
Configure security
certificates
Phone installation process
July 2019 Installing and Administering Avaya J100 Series IP Phones 31
Comments on this document? infodev@avaya.com
To Next Page
Loading...
