Parameters for managing Admin menu
Parameter name Default value Description
PROCSTAT 0 Specifies whether Admin menu is used for
device configuration.
Value operation:
• 0: Specifies that the phone is administered
through Admin menu.
• 1: Specifies that the phone is not administered
through Admin menu.
PROCPSWD 27238 Specifies an authentication code for accessing
Admin menu.
Value operation:
• 27238: Specifies that the authentication code
27238 is set for accessing Admin menu.
• ASCII numbers between 0–7: Specifies an
administrator configured authentication code.
You must provide at least four ASCII numbers.
• Null: Specifies that no authentication code is
required to access Admin menu.
Table continues…
Phone configuration
July 2019 Installing and Administering Avaya J100 Series IP Phones 76
Comments on this document? infodev@avaya.com
To Next Page
Loading...
