Avaya J179 - Chapter 14: Conferencing; Starting a Conference

Accessing the Ethernet IPv4 settings
Procedure
1. Navigate to Main Menu > Administration.
2. In the Access code field, enter the administration password.
The default access code is 27238.
3. Press Enter.
4. Select IP Configuration > Ethernet IPv4.
The phone displays the parameters for IP configuration.
IP configuration field description
Configuration Parameter Name Description
The following parameters are available in Ethernet IPv4 menu:
Use DHCP Specifies the access to view or manually enter the
IP address.
Select one of the following:
• YES: Selects the DHCP option to view the IP
addresses.
• No: Selects the DHCP option to enter the IP
addresss.
Phone Specifies the IP address of the phone. The
available format is nnn.nnn.nnn.nnn.
Gateway Specifies the gateway of the phone. The available
format is nnn.nnn.nnn.nnn.
Mask Specifies the network mask. The available format is
nnn.nnn.nnn.nnn.
The following parameters are available in VLAN menu:
802.1Q Choose one of the following options:
• Auto: Automatic mode.
• On: Turns on the configuration.
• Off: Turns off the configuration.
VLAN ID Specifies the ID for VLAN. The available format is
dddd.
VLAN Test Specifies the time in seconds, the phone waits for
the DHCP server response. The available format is
ddd.
The following parameters are available in the Servers menu:
Table continues…
Phone configuration
July 2019 Installing and Administering Avaya J100 Series IP Phones 78
Comments on this document? infodev@avaya.com