Avaya J179 - Audio; Turning Automatic Gain Control on or off; Enabling and Disabling Bluetooth

Audio
Turning automatic gain control on or off
About this task
Use this procedure to adjust the audio output level to for better quality audio.
Procedure
1. Press Main menu.
2. Scroll to Settings, and press Select.
3. Scroll to Audio, and press Select.
4. Scroll to Automatic Gain Control, and press Select.
5. Select the handset, headset, or speaker for which you want to turn automatic gain control
on or off.
6. Press Toggle to turn automatic gain control on or off.
7. Press Save.
Enabling and disabling Bluetooth
About this task
You can use Bluetooth enabled devices with your phone.
Note:
Avaya J169 IP Phone does not support the Bluetooth feature.
Before you begin
• Ensure the wireless module is installed in your phone.
Procedure
1. Press Main menu.
2. Scroll to Settings, and press Select.
3. Scroll down to Bluetooth, and press Select.
4. Scroll to Bluetooth headset, and press one of the following:
• Toggle: To enable or disable Bluetooth.
• Right Arrow key: To enable Bluetooth.
• Left Arrow key: To disable Bluetooth.
Audio
October 2019 Using Avaya J169/J179 IP Phone in an Open SIP environment 101
Comments on this document? infodev@avaya.com