No. Name Description
1 5V DC Jack To connect the power supply.
2 Network port To connect the Ethernet cable.
3 PC port To connect the computer.
Note:
PC port is disabled when a Wi-Fi
network is used.
4 Headset Jack To connect the headset.
5 Handset Jack To connect the handset.
6 WLAN Module Panel To integrate the wireless module for Wi-Fi/
Bluetooth support.
Note:
WLAN Module Panel is not provided in
the Avaya J169 IP Phone.
Optional components
You can use the following optional components with the phone:
• 5V DC Power adapter
• JBM24 Button Module
• Avaya J100 Expansion Module
• GSPPoE - Avaya 48V PoE power inserter
Optional components
October 2019 Using Avaya J169/J179 IP Phone in an Open SIP environment 17
Comments on this document? infodev@avaya.com
To Next Page
Loading...
