Making a call from the corporate database Сontacts list
About this task
Depending on the configuration by your administrator you may be able to search and call contacts
from other remote contacts lists or directories.
Procedure
1. Press Contacts.
2. Press Search.
3. Enter the digits on the dial pad that correspond to the name of the person you want to call.
For example, press 76484 to search for someone whose name is Smith.
4. Press Search again.
The phone displays the contact saved in the corporate database.
5. Press Call.
Emergency call
Emergency calling is used to connect to a preset emergency services number. The emergency
service number is configured by the administrator.
You can make an emergency call from the following screens:
• Login screen
• Home screen
• Lock screen
In an Open SIP environment, you can make an emergency call only when you are logged in to
your phone.
If your system administrator configures emergency calling for your phone, the Phone screen
displays the Emerg softkey.
Using the Emerg softkey, you can dial only the number that is given the highest priority by the
system administrator. Alternatively, you can dial the emergency numbers by using the dial pad in
the following cases:
• The Emerg softkey is unavailable.
• The Emerg softkey is available. You want to call an emergency number that is not the
highest priority number set by the system administrator.
In an IP Office environment, the Emerg softkey is not available. You must dial the emergency
number by using the dial pad.
Handling outgoing calls
October 2019 Using Avaya J169/J179 IP Phone in an Open SIP environment 30
Comments on this document? infodev@avaya.com
To Next Page
Loading...
