Assigning a ringtone to a contact
About this task
Use this procedure to assign a ringtone to a contact. You can assign a ringtone only to a contact
that is saved in the Contacts list.
Procedure
1. Press Contacts.
2. (Optional) To navigate through Main menu, do the following:
a. Scroll to Applications, and press Select.
b. Scroll to Contacts, and press Select.
3. Select the contact, and press Details.
4. Scroll to the active ringtone, and press Edit.
The Phone screen displays the Select ringtone window.
5. Scroll down to the ringtone that you want to assign, and press Select.
6. (Optional) To play the ringtone, press Play.
7. Press Save.
LDAP Directory
With the LDAP Directory feature, you can search contacts in available Lightweight Directory
Access Protocol (LDAP) directories. To enable the LDAP Directory feature on your phone, your
system administrator must configure it. You can select an LDAP directory as your contact search
source. This selection disables other search sources. When LDAP directory is an active search
source, If you select another search source, this selection disables LDAP directory search.
You can enter multiple search keywords and view up to 49 attributes for each match, such as
personal names, addresses, job titles and telephone numbers.
In 3PCC environment, this feature is not available for CCMS mode.
Setting LDAP Directory as the contact search source
About this task
You can select an LDAP directory as your contact search source.
Before you begin
Ensure that the feature is activated by the administrator. Contact your administrator for details.
Ensure that your system administrator has enabled the LDAP Directory feature on your phone.
Managing Contacts
October 2019 Using Avaya J169/J179 IP Phone in an Open SIP environment 39
Comments on this document? infodev@avaya.com
To Next Page
Loading...
