2.
Scroll to Features, and press Select.
3. Scroll to Broadworks Anywhere, and press one of the following:
• Enable: To enable the feature.
The green LED light turns on if one location is configured, else the user is redirected to
the feature configuration to perform one of the following:
- Press Add: To add a location.
- Press Delete: To delete a location.
- Press Edit: To modify a location.
- Press Toggle: To enable or disable a location.
Note:
The Broadworks Anywhere feature is enabled only if a location is enabled.
• Disable: To disable the feature.
The red LED light turns on, indicating that the feature is available, but inactive.
4. (Optional) To enable or disable Broadworks Anywhere feature, press the corresponding
line key.
Configuring BroadWorks Anywhere locations
About this task
A location is a phone number that you can use with your primary business number. Use this
procedure to configure locations for the BroadWorks Anywhere feature.
Procedure
1.
Press the Main menu.
2. Scroll to Settings, and press Select.
3.
Scroll to Features, and press Select.
4. Scroll to Broadworks Anywhere.
5. Scroll to Locations, and press Select.
6. Press Add, and configure the following:
• Number: The phone number that you want to use for BroadWorks Anywhere.
• Description: A brief description about the phone number.
• Alternate phone number: The alternate phone number that you want to use for
BroadWorks Anywhere.
• BroadWorks call control: The BroadWorks server controls the call. Press Toggle to
enable the server-based call control.
Advanced features
October 2019 Using Avaya J169/J179 IP Phone in an Open SIP environment 54
Comments on this document? infodev@avaya.com
To Next Page
Loading...
