Avaya J179 - Chapter 8: Do Not Disturb; DND On;Off (Features Menu)

• Only an administrator can add the mobile numbers for the Mobility feature.
Note:
To activate the feature, contact your system administrator or go to the BroadSoft web interface
to activate the feature. See
https://www.broadsoft.com/ for more information.
Enabling and disabling BroadWorks Mobility alerting
Procedure
1.
Press Main menu.
2.
Scroll to
Features, and press Select.
3. Scroll to Broadworks Mobility, and press one of the following:
• Enable: To enable the feature.
The green LED light turns on, indicating that some or all configured mobile alerting are
enabled.
• Disable: To disable the feature.
The red LED light turns on, indicating that all configured mobile alerting are disabled.
Note:
If the LED does not light, contact your administrator.
Configuring BroadWorks Mobility
About this task
Use this procedure to configure the mobile device you want to use in conjunction with your office
phone.
Before you begin
Ensure your administrator has enabled the BroadWorks Mobility feature for your extension.
Procedure
1.
Press
Main Menu.
2. Scroll to Settings, and press Select.
3.
Scroll to
Features, and press Select.
4. Scroll to Broadworks Mobility, and press one of the following:
5. Scroll to Mobile identity alerting, and press Select.
6. Do the following:
• Press Toggle for the required mobility numbers.
BroadWorks Mobility
October 2019 Using Avaya J169/J179 IP Phone in an Open SIP environment 57
Comments on this document? infodev@avaya.com