Call Waiting
With the Call Waiting feature, you can get a notification about another incoming call even when
you are on a call. If this feature is enabled, the caller is put on waiting instead of hearing a busy
tone.
The phone displays incoming call screen, plays incoming call ringtone, and the beacon LED
flashes.
Enabling and disabling the Call Waiting feature
Procedure
1.
Press Main menu.
2. Scroll to Features, and press Select.
3. Scroll to Call waiting, and press one of the following:
• Enable: To enable the Call Waiting feature.
• Disable: To disable the Call Waiting feature.
Call Transfer
With the Call Transfer feature, you can transfer your call to another destination number.
The types of Call Transfer are:
• Consultative transfer: Transferring a call by connecting a call with the transfer recipient.
• Blind transfer: Transferring a call without connecting a call with the transfer recipient.
Making a consultative transfer
About this task
Transfer a call by connecting a call with the transfer recipient.
Procedure
1. While on an active call, press Transfer soft key.
The phone displays the Enter transfer destination screen.
The first call is placed on hold.
2. Do one of the following:
• Dial the number to transfer the call.
Call Waiting
October 2019 Using Avaya J169/J179 IP Phone in an Open SIP environment 79
Comments on this document? infodev@avaya.com
To Next Page
Loading...
