Avaya J179 - Setting Mute Alert; Setting Visual Alerting

6. Press one of the following:
• Replace: To replace the contact with another contact.
• Clear: To remove the contact from the Speed Dial.
7. Press Replace or Clear when the phone prompts for confirmation.
Setting Mute alert
About this task
Use this procedure to receive a notification alert when your phone is on mute and you try to
answer a call.
Before you begin
Ensure that the feature is activated by the administrator. Contact your administrator for details.
Procedure
1. Press Main menu.
2. Scroll to Settings, and press Select.
3. Scroll to Phone, and press Select.
4. Scroll to Mute alerting option.
5. Press Toggle to select one of the following:
• Audible: The phone beeps to notify that you have muted your phone.
• Visual: The phone displays the mute icon after some time on the phone status line.
• Both: The phone beeps and displays a mute alert message.
• None: The phone disables the mute alert.
6. Press Save.
Setting Visual alerting
About this task
Use this procedure to illuminate the beacon LED when there are incoming calls and messages.
Procedure
1. Press Main menu.
2. Scroll to Settings, and press Select.
3. Scroll to Phone, and press Select.
4. Scroll to Alerting on calls, and press Select.
Phone
October 2019 Using Avaya J169/J179 IP Phone in an Open SIP environment 95
Comments on this document? infodev@avaya.com