The icons of Avaya J169 IP Phone and Avaya J179 IP Phone look similar, but Avaya J169 IP
Phone has grayscale icons and Avaya J179 IP Phone has color icons.
State Phone icons Button Module
icons
Red LED for the
line key
Green LED for the
line key
Idle Off Off
Incoming call Off Blink
Outgoing call Blink Off
Active / hold On Off
Parked call Off Blink
Unavailable Off Off
Related links
Busy Lamp Field on page 104
Adding a Broadsoft BLF user
About this task
In the Broadsoft environment, you can add a new BLF monitored user by the common
customization process of adding a new line key on the Phone screen.
Note:
To add a BLF user in the Asterisk environment, contact your system administrator.
Before you begin
Ensure that your administrator enables the BLF feature for your extension.
Procedure
1. On the Phone screen, do one of the following:
• Navigate to an empty line, and press Custom.
• On the Avaya J100 Expansion Module, press the button corresponding to an empty line.
Depending on the way your administrator configures your phone, the phone adds a new
BLF user to the first available line or to the selected line.
2. Press Add > More.
3. Press BLF.
Adding a Broadsoft BLF user
April 2021 Using Avaya J169 and J179 SIP IP Phones in Open SIP 105
Comments on this document? infodev@avaya.com
To Next Page
Loading...
