4. (Optional) If there are many user names, press Search.
5. (Optional) Enter the search criteria in one or both the search fields:
• First name
• Last name
6. Press Search.
7. Navigate to the name of the required user, and press Select.
Customizing BLF incoming call indication
About this task
Use this procedure to customize the incoming call indicators in Broadsoft, Open SIP, and Asterisk
environments.
Note:
This setting applies to all your monitored users.
Before you begin
Ensure that the administrator activates the feature. Contact your administrator for details.
Procedure
1.
Press Main menu.
2. Scroll to Settings, and press Select.
3. Scroll to Phone, and press Select.
4. Scroll to Alerting on calls, and press Select.
5. Scroll to Busy lamp field, and press Select.
6. Scroll to Incoming indication, and press one of the following:
• None: To set the BLF pick up indication to none.
• Audible: To set the BLF pick up indication as an audible ringtone only.
• Visual: To set the BLF pick up indication to visual.
When the monitored phone receives an incoming call, you can view the incoming call
details on a pop-up screen similar to the primary line incoming call. There is no ringtone
on Visual mode.
• Both: To set the BLF pick up indication to both audible and visual.
• Default: To set the BLF pick up indication, selected by your system administrator.
Regardless of the above settings, the monitoring phone’s line key displays the monitored
user’s state icons and LED visual indicators.
Busy Lamp Field
April 2021 Using Avaya J169 and J179 SIP IP Phones in Open SIP 106
Comments on this document? infodev@avaya.com
To Next Page
Loading...
