Chapter 16: Simultaneous Ring Personal
With the Simultaneous Ring Personal (SRP) feature, you can list up to 10 phone numbers or SIP-
URI addresses you want to receive calls to in addition to your primary phone. This feature may be
used when, for example, you are not at your desk phone and you need to answer a call from your
cell phone. Simultaneous ring can be turned off when you are at your desk on a call.
Important:
If your cell phone has the voice mail which is activated before your office voice messaging, the
voice messages will be recorded in your cell phone database.
Note:
If Simultaneous Ring Personal is activated, the corresponding LED on the phone is green. If the
feature is disabled, the LED is red. Contact your system administrator or go to the BroadSoft
web interface yourself to activate the feature. See https://www.broadsoft.com/ for more
information.
Related links
Accessing Simultaneous Ring Personal from the phone menu on page 118
Disabling Simultaneous Ring Personal during an active call on page 119
Adding a Simultaneous Ring number on page 119
Editing Simultaneous Ring numbers on page 120
Deleting a Simultaneous Ring number on page 120
Accessing Simultaneous Ring Personal from the phone
menu
About this task
Use this task to access Simultaneous Ring Personal page from the phone menu for configuring
the settings, viewing and editing the list of simultaneous ring numbers.
Procedure
1. On the phone, go to Main menu > Features.
2. Scroll to Simultaneous ringing, and press Config.
Related links
Simultaneous Ring Personal on page 118
April 2021 Using Avaya J169 and J179 SIP IP Phones in Open SIP 118
Comments on this document? infodev@avaya.com
To Next Page
Loading...
