Avaya J179 - Setting Audio Path; Enabling and Disabling Bluetooth

6. Press Toggle to turn automatic gain control on or off.
7. Press Save.
Setting audio path
Before you begin
• Ensure that you have access to set the audio path. Contact your administrator for details.
Procedure
1. Press the Main menu.
2. Scroll to Settings and press Select.
3. Scroll to Audio settings and press Select.
4. Scroll to Audio path, and press Select.
5. Press one of the following:
• Speaker
• Headset
• Default
The Default value displays the Administrator set value.
Enabling and disabling Bluetooth
About this task
You can use Bluetooth enabled devices with your phone.
Note:
Avaya J169 IP Phone does not support the Bluetooth feature.
Before you begin
• Ensure the wireless module is installed in your phone.
Procedure
1. Press the Main menu.
2. Scroll to Settings and press Select.
3. Scroll down to Bluetooth, and press Select.
4. Scroll to Bluetooth headset, and press one of the following:
• Toggle: To enable or disable Bluetooth.
• Right Arrow key: To enable Bluetooth.
Customization
April 2021 Using Avaya J169 and J179 SIP IP Phones in Open SIP 144
Comments on this document? infodev@avaya.com