No. Name Description
1 5V DC Jack To connect the power supply.
2 Network port To connect the Ethernet cable.
3 PC port To connect the computer.
Note:
PC port is disabled when a Wi-Fi
network is used.
4 Headset Jack To connect the headset.
5 Handset Jack To connect the handset.
6 WLAN Module Panel To integrate the wireless module for Wi-Fi/
Bluetooth support.
Note:
WLAN Module Panel is not provided in
the Avaya J169 IP Phone.
Optional components
You can use the following components to your phone. These components are not a part of your
phone package and needs to ordered separately. You might need assistance of your system
administrator to install few of these items:
• PSAC12R–050 – 5V DC Power adapter
• Avaya J100 Expansion Module
• PoE power supply
• Avaya J100 Wireless Module (Wi-Fi Module)
Avaya J169/J179 phone overview
April 2021 Using Avaya J169 and J179 SIP IP Phones in Open SIP 20
Comments on this document? infodev@avaya.com
To Next Page
Loading...
