LDAP Directory
With the LDAP Directory feature, you can search contacts in available Lightweight Directory
Access Protocol (LDAP) directories. An LDAP directory option appears at the top of the Contacts
application list.
You can also select an LDAP directory as your contact search source. This selection disables
other search sources. When LDAP directory is an active search source, if you select another
search source, this selection disables LDAP directory search.
You can enter multiple search keywords and view up to 49 attributes for each match, such as
personal names, addresses, job titles and telephone numbers.
You can add frequently used LDAP contacts to your local Contacts with the help of the +Contact
soft key.
You can combine any found LDAP contact with an existing local contact with the help of the
Combine soft key.
In 3PCC environment, this feature is not available for CCMS mode.
Setting LDAP Directory as the contact search source
About this task
You can select an LDAP directory as your contact search source to enable searching from the
Contacts application. This selection disables other available search sources for the Contacts
application.
Before you begin
Ensure that the administrator activates the feature. Contact your administrator for details.
Procedure
1. Press Contacts.
2. (Optional) To navigate through Main menu, do the following:
a. Scroll to Applications and press Select.
b. Scroll to Contacts and press Select.
3. To select LDAP Directory as a source for contact search, press Search > More >
Sources.
4. Scroll to LDAP contacts, and press Toggle.
LDAP Directory is now your contact search source. Other sources are disabled. The phone
displays the following message: LDAP selected — other search sources
disabled.
5. Press Save.
Contacts
April 2021 Using Avaya J169 and J179 SIP IP Phones in Open SIP 50
Comments on this document? infodev@avaya.com
To Next Page
Loading...
