BroadWorks Mobility
With the BroadWorks Mobility feature, you can use your personal mobile device in conjunction
with your desk IP phone. You can make calls from your personal mobile using a BroadWorks
business number as the calling ID.
Limitations
The following are the limitations of the BroadWorks Mobility feature:
• Only an administrator can enable or disable the Mobility feature.
• Only an administrator can add the mobile numbers for the Mobility feature.
Note:
To activate the feature, contact your system administrator or go to the BroadSoft web interface
to activate the feature. See
https://www.broadsoft.com/ for more information.
Enabling and disabling BroadWorks Mobility alerting
Procedure
1.
Press
Main menu.
2.
Scroll to Features, and press Select.
3. Scroll to BroadWorks Mobility, and press one of the following:
• Enable: To enable the feature.
The green LED light turns on, indicating that some or all configured mobile alerting are
enabled.
• Disable: To disable the feature.
The red LED light turns on, indicating that all configured mobile alerting are disabled.
Note:
If the LED does not light, contact your administrator.
Configuring BroadWorks Mobility
About this task
Use this procedure to configure the mobile device you want to use in conjunction with your office
phone.
Before you begin
Ensure your administrator has enabled the BroadWorks Mobility feature for your extension.
BroadWorks Mobility
April 2021 Using Avaya J169 and J179 SIP IP Phones in Open SIP 71
Comments on this document? infodev@avaya.com
To Next Page
Loading...
