Avaya J179 - Page 72

Procedure
1.
Press Main menu.
2. Scroll to Settings, and press Select.
3.
Scroll to Features, and press Select.
4. Scroll to BroadWorks Mobility, and press one of the following:
5. Scroll to Mobile identity alerting, and press Select.
6. Do the following:
• Press Toggle for the required mobility numbers.
• Press Back to go back to the previous menu.
7. Scroll to Profile identity alerting.
8. Configure the following fields:
• Device to ring
• Include shared call appearance
• Include BroadWorks Anywhere
• Include executive assistant
• Mobile identities alerted
Profile identity alerting field description
Name
Description
Device to ring Specifies that the device must ring when the phone
number gets a call. Use the Right Arrow or Left
Arrow key to select one of the following:
• Fixed: To set the office phone or fixed devices to
ring when the phone number gets a call.
Per your requirement you can select SCA,
BroadWorks Anywhere, and executive location for
fixed.
• Mobile: To set the mobile phone to ring when the
phone number gets a call.
• Both: To set both the mobile phone and the fixed
device to ring when the phone number gets a call.
Include shared call appearance Specifies that all SCA devices are alerted.
Ensure to set Device to ring to either Fixed or
Both.
Table continues…
Advanced features
April 2021 Using Avaya J169 and J179 SIP IP Phones in Open SIP 72
Comments on this document? infodev@avaya.com