• Speed Dial of a Presence user in an idle state.
• View outgoing call status
• Barge—in on an active call
The administrator configures the action of the Presence line key. Depending on the configuration,
when you press the Presence line key, the phone does one of the following:
First soft key is the key on the bottom left corner of the phone screen.
• Performs the first soft key action.
• Highlights the corresponding line.
• Does not take any action if the corresponding line is already highlighted.
However, in this case you can use the Ok button on the phone to perform the action of the
first soft key.
Presence icons and visual LED indication
The following table displays the Presence state icons and LED indicators for the Avaya J100
Series IP Phones and Avaya J100 Expansion Module.
The icons of Avaya J169 IP Phone and Avaya J179 IP Phone look similar, but Avaya J169 IP
Phone has grayscaled icons and Avaya J179 IP Phone has color icons.
State
Phone icons Red LED for the line
key
Green LED for the line
key
Idle Off Off
Incoming call Off Blink
Outgoing call Blink Off
Active / hold On Off
Parked call Off Blink
Unavailable Off Off
Customizing Presence incoming call indication
About this task
You can customize the incoming call indicators to all your monitored users.
Before you begin
Ensure that the feature is activated by the administrator. Contact your administrator for details.
Presence
July 2020 Using Avaya J169/J179 IP Phone in an Avaya Cloud Office
™
41
Comments on this document? infodev@avaya.com
To Next Page
Loading...
