2. Press Select.
3. Scroll to Extend Call, and press Select.
4. Press OK.
You will receive a call on your cell phone to answer the extended call.
Activating Send All Calls
About this task
When Send All Calls (SAC) feature is on, your incoming calls go directly to a predefined coverage
number, typically your voice mail. Incoming calls ring once at your extension and then go directly
to a number which is set by your system administrator.
You can also turn Send All Calls on or off by using the phone Features list.
Note:
Do not enable the SAC feature in case you selected the cover all option for the coverage path.
Enabling both features at the same time can cause duplicate entries in the call log.
Procedure
1. Navigate to the Features screen.
2. Scroll to choose Send All Calls.
3. Press Select or OK or the corresponding line button to activate the feature.
Hunt Group Busy
Using the Hunt Group Busy feature, users can opt-in or opt-out of the calls specific to the hunt
group. A hunt group is a group of users who handle the similar types of calls. A user can be a part
of multiple hunt groups.
The Features screen displays the Hunt Group Busy buttons. Each Hunt Group Busy button
corresponds to a specific hunt group. The Hunt Group Busy button label includes a unique four-
digit index for each group.
Using Hunt Group Busy
About this task
Use the Hunt Group Busy buttons on the Features screen to manage the calls from a particular
hunt group.
Activating Send All Calls
October 2019 Using Avaya J169/J179 IP Phone SIP 63
Comments on this document? infodev@avaya.com
To Next Page
Loading...
