Avaya J179 - Calling in Your Intercom Group; Excluding Others from Bridging on to Your Call

Procedure
1. To stop receiving calls from a particular hunt group, press the corresponding Hunt Group
Busy button.
2. To turn off the Hunt Group Busy feature for a particular hunt group and start receiving calls,
press the corresponding Hunt Group Busy button.
Calling in your intercom group
About this task
Use this procedure to call a specific extension or an intercom group.
Before you begin
Ensure that the feature is activated by the administrator. Contact your administrator for details.
Procedure
1. Press Main menu, and scroll to Features.
2. Press Select.
3. Scroll to Dial Icom, and press Select.
The intercom group number shows next to the Dial Intercom feature.
4. Press the number that corresponds to the destination extension.
5. Press Enter.
Example
Auto icom 2 3: The first number denotes the intercom group number for the Dial Intercom feature.
The next number denotes the extension your administrator has predefined as your automatic
intercom destination extension.
Excluding others from bridging on to your call
About this task
Use the Exclusion feature to prevent others who are bridged to your extension from bridging onto
a specific call. You can activate exclusion only during an active call.
Before you begin
Ensure that the feature is activated by the administrator. Contact your administrator for details.
Procedure
1. Press Main menu, and scroll to Features.
Advanced features
October 2019 Using Avaya J169/J179 IP Phone SIP 64
Comments on this document? infodev@avaya.com