Avaya J179 - Busy Indicator Icons and LED Indication; Busy Indicator Call Operations

Busy Indicator icons and LED indication
Busy Indicator icons look the same as Presence “Available” and “On a call” icons but they might
differ depending on the phone or the button module model.
The following table displays the Busy Indicator icons and LED indication for Avaya J169/J179 IP
Phone, JBM24 Button Module, and Avaya J100 Expansion Module.
The icons of Avaya J169 IP Phone and Avaya J179 IP Phone look similar, but Avaya J169 IP
Phone has grayscaled icons and Avaya J179 IP Phone has color icons.
State Phone icons JBM24 Button
Module icons
Avaya J100
Expansion
Module icons
Red LED for
the line key
Green LED for
the line key
Idle Off Off
Busy Off On
Related links
Customizing phone keys on page 92
Busy Indicator on page 70
Busy Indicator call operations
Making a call to a monitored user
About this task
You can make a quick call to monitored users, for example, when you want to provide direct
instructions to them.
Procedure
Do one of the following:
• On the Phone screen, scroll to the required Busy Indicator line, and press Call.
• Press the required Busy Indicator line key.
Making a conference call with a monitored user
About this task
Use this procedure to add a monitored user to an active call to set up a conference call.
Procedure
1. During an ongoing call, press More > Conf.
The phone puts the call on hold, and displays the Select a participant notification.
Busy Indicator
October 2019 Using Avaya J169/J179 IP Phone SIP 71
Comments on this document? infodev@avaya.com