Avaya J179 - Chapter 2: Customization; Enabling and disabling Bluetooth; Pairing a Bluetooth enabled headset with your phone

Chapter 2: Customization
Enabling and disabling Bluetooth
About this task
You can use Bluetooth enabled devices with your phone.
Note:
Avaya J169 IP Phone does not support the Bluetooth feature.
Before you begin
• Ensure the wireless module is installed in your phone.
Procedure
1. Press Main Menu.
2. Scroll to Settings and press Select.
3. Scroll down to Bluetooth, and press Select.
4. Scroll to Bluetooth headset, and press one of the following:
• Toggle: To enable or disable Bluetooth.
• Right Arrow key: To enable Bluetooth.
• Left Arrow key: To disable Bluetooth.
Note:
For some Bluetooth headsets, volume can be adjusted during the first call after
rebooting the phone. Toggle the slider of the pop-up panel to the right to increase the
volume, and to the left to decrease it.
Pairing a Bluetooth enabled headset with your phone
About this task
You can pair a maximum of ten Bluetooth enabled headsets with the phone, but you can use only
one headset at a time. The phone displays the list of available devices and paired devices.
February 2022 Quick Reference for Avaya J169 and J179 SIP IP Phones in Open SIP 22
Comments on this document? infodev@avaya.com