You can use the Navigation keys to scroll to the required functionality and press Select.
8. To move the selected line key, do the following:
a. Press Move.
b. Use the Navigation keys to move the selected line.
c. (Optional) If the new location is empty, press Select.
d. (Optional) If the new location is already assigned a key, press Swap.
9. To set a new label, do the following:
a. Press Relabel.
b. Type the name of the label.
c. If your native language uses extended Latin or non-Latin symbols, press More >
Symbol the soft key to open the Symbols menu and select the necessary symbols
there. Press Insert > More > Save.
10. To delete a key, press Delete, and then confirm the deletion.
Setting the network mode
About this task
You can set the network mode to Ethernet or Wi-Fi. You do not need to perform this procedure if
your phone is configured to connect to Ethernet or a specific Wi-Fi network.
Avaya J169 IP Phone does not support the Wi-Fi feature.
Before you begin
Ensure that the system administrator gave you access to perform this task.
Procedure
1. Press Main Menu.
2. Scroll to Settings and press Select.
3. Scroll to Network and press Select.
4. Scroll to Network mode.
The Network mode setting shows the following options:
• Ethernet: To connect to an Ethernet network.
• Wi-Fi: To connect phone to a Wi-Fi network.
5. Press one of the following:
• Toggle
• Right Arrow key
Customization
February 2022 Quick Reference for Avaya J169 and J179 SIP IP Phones in Open SIP 24
Comments on this document? infodev@avaya.com
To Next Page
Loading...
