Avaya J179 - Chapter 2: Operations; Entering the provisioning details

Chapter 2: Operations
Entering the provisioning details
About this task
You can enter the provisioning server address on the phones when the phone displays the Enter
provisioning details screen.
Before you begin
Obtain the provisioning server address from the system administrator.
Procedure
1. On Enter provisioning details screen, press one of the following:
• Config: To enter the provisioning server address.
• Never: To never prompt for the provisioning server address.
• Cancel: To cancel the prompt and display the Login screen.
2. After you press Config, enter the provisioning server address in the Address field.
The address is an alphanumeric URL. For example, http://myfileserver.com/
j100/.
Tip:
To enter the dot symbol (.) in the field, press the alphanumeric soft key to toggle to the
ABC mode.
To enter the forward-slash symbol (/) in the field, press the / soft key.
3. (Optional) Enter the Group number.
The value ranges from 0 to 999. If you do not enter a value, the phone uses the default
value of 0.
4. Press Save.
The phone continues the boot process and connects to the provisioning server.
Related links
Setting Up the Avaya J179 IP Phone (video)
February 2022 Quick Reference for Avaya J169 and J179 SIP IP Phones in Open SIP 4
Comments on this document? infodev@avaya.com