Chapter 29: System Administration
If necessary, the system administrator can configure you as a system phone user. This allows you to
perform a range of additional functions to help maintain your phone system.
These functions are not supported by the J139.
Related links
Checking the System Information on page 169
Checking the Time Server Status on page 170
Setting the Date on page 170
Setting the Time on page 171
Setting the Time Offset on page 172
Restarting the System on page 173
Managing the Memory Cards on page 174
Reporting System Alarms on page 175
Checking the System Information
Being able to check and report the system name, software version and IP address may be useful
when reporting any potential problems to the system maintainer.
Procedure
1. Press the Features soft key if shown.
• To do this during a call, press the
PHONE key and then press Features.
2. Use the cursor keys to select Phone User.
3. Use the cursor keys to select System Administration.
• This option is only present if you have been configured as a system phone user by your
system administrator.
• This menu is not supported on the J139.
4. Enter your security PIN (login code) and press Done.
5. Use the cursor keys to select System Information.
6. The system displays information about itself.
April 2020 J100 Series Phone User Guide 169
Comments on this document? infodev@avaya.com
To Next Page
Loading...
