Local Administrative Options Using the Telephone Dialpad
Issue 1 June 2007 77
4. If you do not reset the telephone, the telephone displays the following prompt:
5. Press the * key to terminate the procedure without restarting the telephone. Otherwise,
press # and perform the following Restart procedure.
Restart the Telephone
Use the following procedure to restart the telephone.
1. While the telephone is on-hook and idle, press the following sequence of keys on the
faceplate of the telephone:
Mute 7 3 7 3 8 # (Mute R E S E T #)
Note:
Note: Press the Mute button momentarily. Do not press this button while pressing other
keys/buttons.
The IP telephones display the following text left-justified at the top of the display:
2. Press the # button to reset values to their defaults, or * to continue a restart without resetting
the values to their defaults.
The telephones display the following text left-justified at the top of the display while the
system values are reset to defaults:
Once the system values are reset, the following prompt displays on all IP telephones:
3. Press the * key to terminate the procedure without restarting the telephone.
Press the # key to restart the telephone.
The remainder of the procedure depends on the status of the boot and application files.
Restart phone?
*=no #=yes
Reset values?
*=no #=yes
Resetting
values.
Restart phone?
*=no #=yes
To Next Page
Loading...
