101
System Flow Chart—System (Continued)
Hold Reminder Tone
Dial # 1 2 7
Dial 0=Not Active
1=10 seconds
2=20 seconds
3=30 seconds
4=45 seconds
5=60 seconds
6=90 seconds
7=120 seconds
8=150 seconds
9=180 seconds
Mode of Operation
Press # 1 9 8
Enter the system password
Dial 1=Key (factory setting)
2=Hybrid
System Reset—Programming Saved
IMPORTANT: Using this procedure disconnects any active calls but
retains system settings. Use it only if the system fails to function
correctly after a power failure or down period. Dial
# 7 2 8.
To Next Page
Loading...
