Avaya PARTNER Advanced Communications System - Backup and Restore

102
System Flow Chart—System Speed Dial Numbers
System Flow Chart—Lines
Dial Mode
Dial # 2 0 1
Dial a system line number
Dial 1=Touch-Tone

2=Rotary
Press
n to program another line
Hold Disconnect Time
Dial # 2 0 3
Dial a system line #
Dial 00=No Detection,
01=50 msec, 02=100 msec, 03=150 msec,
04=200 msec, 05=250 msec, 06=300 msec,
07=350 msec, 08=400 msec, 09=450 msec

10=500 msec, 11=550 msec, 12=600 msec.
Press
n to program another line
Automatic System Answer Lines
Dial # 2 0 4
Dial a system line #
Dial 1=Assigned
2=Not Assigned

Press
n to program another line
Direct Extension Dial Lines
Dial # 2 0 5
Dial a system line #
Dial 1=Assigned
2=Not Assigned

Press
n to program another line
Group Call Distribution
Dial # 2 0 6
Dial a group number (1–6, 7 for VMS)
Dial
a system line #
Dial 1=Assigned
2=Not Assigned

3=VMS Line Cover
(only for Hunt Group 7)
Press
n to program another line
Line Coverage Extension
Dial # 2 0 8
Dial a system line #, then a system
extension #, no line owned by an
extension

Press
n to program another line
Press
r to unassign ownership
Unique Line Ringing
Dial # 2 0 9
Dial a system line #
Dial 1

2–8
Pool Line Assignment
Dial
# 2 0 7
Dial a system line #
Dial 1=No Pool
2=Main Pool 880

3=Pool 881
4=Pool 882
5=Pool 883
Press
n to program another line
To remove a number:
Press
f 00 to enter programming mode
Press
f
Dial the System Speed Dial number’s code (600-699)
Press
!
To remove another number, repeat:
Press
f 00 to exit programming mode
To program a number:
Press
f 00 to enter programming mode
Press
f
Dial a three-digit code (600–699)
Dial the telephone number—up to 28 digits including special characters. To
“mark” it (to override restrictions), dial
* before the telephone #.
To program another number, or to change a number, repeat:
Press
N P, enter a new extension # and repeat
above steps
Press
f 00 to exit programming mode