Avaya PARTNER Advanced Communications System - Page 103

103
System Flow Chart—Extensions
Line Assignment
Dial # 3 0 1
Dial a system extension #
To remove all existing line assignments,
press
r before selecting a line
Dial a line number
Dial 1=Assigned

2=Not Assigned
3=Select Button then press a
programmable button (to assign the line to
that button). If you use option 3 after a line
has been assigned, the line moves from the
old button to the new button you select.
Dial a line number
Press
n to program another line for this
extension
To program another extension:
Press
N P, enter a
new extension # and repeat above steps
Line Access Restriction
Dial # 3 0 2
Dial a system extension #
Dial a system line #
Dial 1=No Restriction
 , 2=Outgoing Only,
3=Incoming Only, 4=No Access (line appears
on button, but you can use line only to pick up a
transferred or held call)
To program another extension:
Press
N P, enter a
new extension number and repeat above steps
Display Language
Dial # 3 0 3
Dial a system extension #
Dial 1=English

2=Spanish
3=French
Press
n to program another
extension
Automatic Extension Privacy
Dial # 3 0 4
Dial a system extension #
Dial 1=Assigned
2=Not Assigned

Press
n to program another
extension
Abbreviated Ringing
Dial # 3 0 5
Dial a system extension #
Dial 1=Active (1 ring)

2=Not Active (repeated ringing)
Press
n to program another
extension
Transfer Return Extension
Dial # 3 0 6
Dial a system extension #
Dial # of extension (10–57) to which call
should return if not answered, Extension
transferring call

Press n to program another
extension
Intercom Dial Tone
Dial # 3 0 9
Dial a system extension #
Dial 1=Regular

2=Machine
Press
n to program another extension
Automatic VMS Cover
Dial # 3 1 0
Dial a system extension #
Dial 1=Assigned
2=Not Assigned

Press
n to program another extension
Distinctive Ringing
Dial # 3 0 8
Dial a system extension #
Dial 1=Active
2=Not Active

Press
n to program another extension
Forced Account Code Entry
Dial # 3 0 7
Dial a system extension #
Dial 1=Assigned
2=Not Assigned

Press
n to program another
extension