4 Programming System Features
Dialing Restrictions and Permissions 53
Quick Reference Guide
This procedure is the most extreme way to restrict dialing. For example, an
extension with a line set to In Only or No Access cannot select the line to dial
out—even for numbers on the Emergency Phone Number List (#406).
To restrict an extension from making calls on a specific line:
1 Press f00ss#302 at extension
10 or 11.
2 At the Extension: prompt, enter the extension number to be programmed.
3 At the Line: prompt, enter the line number to be restricted at this
extension.
The current restriction appears.
4 To change the line restriction for this extension, press D until the
appropriate value appears.
• 1 = No Restriction
(calls permitted on that line; this is the factory setting)
• 2 = Out Only
(can only make outside calls, not receive them, on that line)
• 3 = In Only
(can only receive calls, not make them, on that line)
• 4 = No Access (cannot receive or make calls, but can join calls, receive
transferred calls, or pick up calls on hold on that line)
5 Do one of the following:
• To restrict another line at this extension, press
n or p until
the line number shows on the display. Repeat Step 4.
• To restrict another extension, press N + P and
begin at Step 2.
6 Select another procedure, or exit programming mode.
To Next Page
Loading...
