6 Maintaining Your System
72 Using a PC Card
Quick Reference Guide
7 Do not remove the PC card. The card automatically converts to a
backup/restore and remote access card. If you removed other PC cards,
PVM or ASA/DXD, for example, power down the system and reinstall the
PC cards after the upgrade is complete.
8 If you have a 2-slot carrier or a stand-alone configuration, you are finished
with this procedure. If you have a 5-slot carrier, continue with Step 9.
9 Make sure all modules are seated properly.
10 Perform the following steps to replace the cover for the 5-slot carrier:
a Position the carrier cover over the modules so that the openings on the
top of the carrier cover align correctly with the tabs at the top of the
installed 5-slot carrier and modules.
b Rotate the carrier cover into position so that it aligns correctly with the
thumb screw opening on the bottom of the carrier.
c Tighten the thumb screw. To ensure proper alignment and safe
operation, tighten the thumb screw securely.
To Next Page
Loading...
