PARTNER
®
Advanced Communications System
49
Form G3: Instructions for Direct Inward Dialing (DID)
Form G3: Instructions for Direct Inward Dialing (DID) 0
Q
UESTION 1: EXPECTED NUMBER OF DIGITS:
Enter the number of digits the T1 service provider will send for each incoming call. Choices are 1 to 4 digits. The default is 3 digits.
Q
UESTION 2: DID BACKUP EXTENSION:
Enter the backup extension for calls on DID lines. The backup extension receives incoming DID calls that are not mapped to an extension,
calling group, or hunt group. The default setting is “10.”
Q
UESTION 3: DID NUMBERS PURCHASED:
Enter the DID numbers you purchased from the T1 service provider.
To Next Page
Loading...
