Programming System Options
Dialing Restrictions and Permissions
4-23
Disallowed List Assignments (#405) 4
Use this feature to assign up to eight Disallowed Phone Number Lists to specific extensions.
Considerations 4
■ You must use Disallowed Phone Number Lists (#404) to create the lists of disallowed
telephone numbers before you use this procedure.
■ When a Disallowed Phone Number List is assigned to an extension, the list applies to all
lines to which the extension has access.
Programming 4
To assign Disallowed Phone Number Lists to an extension:
1. Press
f00ss#405 at extension 10 or 11.
2. Enter the number of the extension to be programmed.
3. Enter the list number (1–8).
4. To assign or unassign the list, press
D until the appropriate value appears.
■ 1 = Assigned to extension
■ 2 = Not Assigned to extension (the factory setting)
5. Do one of the following:
■ To assign or unassign another list for this extension, press n or p until the list
number appears on the display. Then repeat Step 4.
■ To program another extension, press N + P, and begin at Step 2.
6. Select another procedure, or exit programming mode.
Line Access Restriction (#302) 4
Use this feature to restrict an extension from receiving and/or making outside calls on a specific
line. For example, you may want a secretary to answer calls on a manager’s line, but not to make
any outgoing calls on the line; in this case you can assign the manager’s line to the secretary’s
extension and restrict it to In Only.
This procedure is the most extreme way to restrict dialing. For example, an extension with a line
set to In Only or No Access cannot select the line to dial out—even for numbers on the
Emergency Phone Number List (#406).
To Next Page
Loading...
