Programming System Options
System Password (#403)
4-61
Programming 4
To change the Star Code Dial Delay setting:
1. Press
f00ss#410 at extension 10 or 11.
The current setting is displayed.
2. Press the number on the dialpad for the setting you want, or press
D or d until
the correct setting appears:
■ 0 = 0 Second Delay (the factory setting)
■ 1 = 1 Second Delay
■ 2 = 2 Seconds Delay
■ 3 = 3 Seconds Delay
■ 4 = 4 Seconds Delay
■ 5 = 5 Seconds Delay
■ 6 = Not Active
3. To return to the default setting, press
r.
4. Select another procedure, or exit programming mode.
System Password (#403) 4
Use this feature to define a four-digit password that users can enter from PARTNER and MLS
telephones to override dialing restrictions (if the extension has access to an outside line).
Considerations 4
■ This feature is available only on PARTNER and MLS telephones.
■ The password overrides all dialing restrictions except Line Access Restriction (#302) and
Pool Access Restriction (#315).
■ Once a password is programmed, you must enter it to turn Night Service on and off.
Additionally, if Night Service is on, users in the Night Service Group must enter the
password to make any outgoing calls (except calls to numbers on the Emergency Phone
Number List (#406) and Marked System Speed Dial numbers). Dialing restrictions for
extensions not in the Night Service Group remain the same as during normal daytime
operation.
To Next Page
Loading...
