PARTNER
®
Advanced Communications System Installation, Programming, and Use
System Speed Dial
4-64
■ Use a completed System Speed Dial form to program the list of numbers. After programming
the numbers, distribute a copy of the completed form to users. See Appendix C for a blank
form.
■ If the system is connected to a PBX or Centrex system and a dial-out code (usually 9) is
needed to place calls outside the PBX or Centrex system, include the dial-out code and one or
more pauses (if available) in Speed Dial numbers that must dial out of the PBX or Centrex
system.
■ If you program 911 or other emergency numbers as Speed Dial numbers and want to place
test calls, do the following:
— Perform such activities in the off-peak hours, such as early morning or late evening.
— Remain on the line and explain to the dispatcher the reason for the call before hanging up.
■ You can use multiple Auto Dial buttons and Speed Dial numbers during the course of a single
call. For example, you can use an Auto Dial button or Speed Dial number to dial the Account
Code Entry feature code, and another Speed Dial number to dial the account code.
Programming 4
To program System Speed Dial numbers:
1. Press
f00 at extension 10 or 11.
2. Select a three-digit code by pressing
f and dialing three digits between 600 and 699.
If a number is assigned already to the code, the number appears on the display. If no number
is assigned to the code, Blank appears.
3. Enter the number. For example, to program 555-4757, press
5554757.
4. Continue programming System Speed Dial numbers:
■ To program another System Speed Dial number, start from Step 2.
■ To program over an existing number, enter the new number after selecting the three-digit
code.
■ To remove a System Speed Dial number, enter the number’s three-digit code and
press
! once.
5. Press
f00 to exit programming mode.
To mark the System Speed Dial number to override dialing restrictions, precede the
number by a
*. For example, to mark the number 555-1001, press
*5551001.
To Next Page
Loading...
