PARTNER
®
Advanced Communications System Installation, Programming, and Use
System Components
1-16
System Telephones 1
System telephones include the following:
■ PARTNER telephones
— PARTNER-34D
— PARTNER-18D
— PARTNER-18
— PARTNER-6
■ MLS telephones
■ MLC-6
■ TransTalk
©
9000-series wireless telephones
Available in Release 5.0 or later, PARTNER ACS supports PARTNER Endeavor telephones when
an Endeavor 362EC module is installed in the carrier. The Endeavor telephones include:
■ PARTNER Endeavor-34D
■ PARTNER Endeavor-18D
■ PARTNER Endeavor-18
■ PARTNER Endeavor-6
Only the PARTNER telephones are discussed in this guide (see Chapter 6, “Using the
Telephones”). For information about an MLS, MLC, TransTalk 9000-series, or PARTNER
Endeavor telephone, refer to the documentation that came with the telephone.
Intercom Autodialers 1
PARTNER telephones support the PARTNER-CA48 Call Assistant Intercom Autodialer at
extensions 10 and 11. The autodialer provides Auto Dial buttons for all of the extensions in your
system. The status lights next to each button also indicate calling activity at that extension. You
can program the Auto Dial buttons for either intercom ringing, voice signaling, or manual
signaling. (Each user can have only one Auto Dial button—either on the system telephone or on
the autodialer—for another extension in the system.) The Auto Dial buttons allow you to dial,
signal, or transfer calls to system extensions with one touch.
To Next Page
Loading...
