Job Aid: Replacing the SAMP on the Avaya S8500 Series server
116 Job Aids for Field Replacements (FRUs) for the Avaya S8500 Server
2. Slide the server cover back from the front panel until the cover’s tabs are released from the
top slot of the front panel.
3. Lift the cover straight up and move it away from the server.
Removing and replacing the SAMP card on the S8500B server
The SAMP card resides in PCI-X slot 1 located under the PCI support bracket. To remove the
PCI support bracket and the riser connector:
1. Loosen the captive screw on the SAMP riser-card assembly as shown in
Figure 29: Removing/replacing the SAMP card on the S8500B server
on page 117.
To Next Page
Loading...
