Installing the new network interface card
03-300529 Issue 4 January 2008 147
Installing the new network interface card in the S8500C server
Note:
Note: Wear an antistatic wrist ground strap whenever handling the server or its
components. Connect the strap to an approved ground, such as an unpainted
metal surface. See the job aid titled Approved Grounds for more information.
To install the replacement dual NIC in the S8500C server:
1. Carefully grasp the new NIC by the top edge or upper corners and align it with the PCI-2
expansion slot on the motherboard. (The SAMP is connected on the other side of this
connector.) Press the NIC firmly into the expansion slot. See Figure 43: Inserting the
network interface card in the S8500C server on page 147.
Figure 43: Inserting the network interface card in the S8500C server
2
1
Slot 1
Slot 2
2
3
h3msn85c LAO 032306
1
To Next Page
Loading...
