Avaya S8500 Series - Release 3.1 Ethernet Configurations; Release 3.0 Ethernet Configurations

Job Aid: Replacing the Avaya S8500 dual network interface
156 Job Aids for Field Replacements (FRUs) for the Avaya S8500 Server
Release 3.1 Ethernet configurations
For Release 3.1 use the Ethernet interface mapping in Table 7.
Release 3.0 Ethernet configurations
For Release 3.0 use the Ethernet interface mapping in these two tables:
l For private/dedicated control networks use Table 8: Ethernet interface mapping (Release
3.0-private/dedicated network) on page 156.
l For combined Control Network with the Corporate LAN use Table 9: Ethernet interface
mapping (Release 3.0-combined control with corporate LAN) on page 157.
Table 7: Ethernet interface mapping (Release 3.1)
Interface S8500C server
Web display (physical port)
Linux shell IP configuration: logical port (ifconfig)
l Eth0-Control Network A
l Eth1-Services laptop
l Eth2-Internal SAMP interface
l Eth3-Control Network B (ESS)
l Eth4-Enterprise LAN
Table 8: Ethernet interface mapping (Release 3.0-private/dedicated network)
Interface S8500 server S8500B server
Web display (physical
port)
l Eth0-Control Network A
l Eth1-Services port
l Eth2-Corporate LAN
l Eth3-Not used in Release 3.0
l Eth0-Control Network A
l Eth1-Services port
l Eth2-Control Network B
l Eth3-Corporate LAN
l Eth4-SAMP Ethernet port (not
displayed on the Web)
Linux shell IP
configuration: logical
port (ifconfig)
l Eth0-Corporate LAN
l Eth1-not used
l Eth2-Control Network A
l Eth3-Services port
l Eth0-Control Network A
l Eth1-Control Network B
l Eth2-Corporate LAN
l Eth3-Services port
l Eth4-SAMP Ethernet port