Avaya S8500 Series - Installing the Software on the S8500 C Server

Job Aid: Replacing the Avaya S8500/B/C server
70 Job Aids for Field Replacements (FRUs) for the Avaya S8500 Server
Installing the software on the S8500C server
The following steps install the Communication Manager on the replacement S8500C server.
1. Connect the services laptop to services port (Eth2) on the rear of the server.
2. Connect to 192.11.13.6 and press Enter to view the first screen.
Note:
Note: To navigate on these screens, use the arrow keys to move to an option, then
press the space bar to select the option. Press Enter to submit the screen.
3. Select Install, make sure <OK> is highlighted, and press Enter.
The following screen is optional; it only shows if there is something on the hard drive.
4. Select <Yes> and press Enter.
The Select Release Version screen displays asking if you want to build Avaya
Communication Manager.