Job Aid: Replacing the Hard Drive on the Avaya S8500 server
84 Job Aids for Field Replacements (FRUs) for the Avaya S8500 Server
37 S8500 only: Clear ARP cache
on laptop
From a DOS command link, type arp -d 192.11.13.6
and press Enter.
38 S8500 only: Connect laptop
to the RSA card
Connect to the Ethernet port (to the right of the serial
connector) on the back of the RSA card using a crossover
cable.
39 S8500 only: Log onto the
RSA
Open an internet browser window. In the Address field, type
192.11.13.6 and press Enter.
On the Enter Network Password screen, use the default
login craft and password used before the hard drive was
removed.
40 S8500 only: Set a timeout
value
In the Welcome screen, in the Inactive session timeout
value field, select no timeout and click Continue. The no
timeout value allows 60 minutes of inactivity before
disconnecting.
41 S8500 only: Set the loader
watchdog timeout
Under ASM Control, click System Settings. Scroll down to
the Server Timeouts section, and in the Loader watchdog
field, select 5.0 (minutes) and click Save.
42 S8500 only: Log off and
disconnect from the RSA
Click Log Off. Once you are logged off, disconnect from the
services port on the RSA.
Final tasks for replacing a hard drive in an S8500 server (continued)
9 Task Description
5 of 5
To Next Page
Loading...
