Avaya S8500 - Disconnect from the Media Server; Log off All Administration Applications; Release Alarm Suppression (Optional); Set the Product ID

2 Migrating from an S8500 Media Server to S8710 Media Server
On the active S8710 Media Server
132 Migrating to the Avaya S8700 or S8710 Media Server
June 2004
Release alarm suppression (optional)
If you complete the migration well before the time set when you suppressed alarming, you may want to
release alarm suppression manually rather than wait.
1 Click Start > Run to open the Run dialog box
2 Type telnet 192.11.13.6 and press Enter.
3 Log in as craft or dadmin.
4 Type almsuppress -n and press Enter to release alarm suppression.
5 Log off.
Set the Product ID
NOTE:
It is different from the one on the S8500 Media Server.
1 Click Start > Run to open the Run dialog box.
2 Type telnet 192.11.13.6 and press Enter.
3 Log in as craft or dadmin.
4 At the prompt, type productid -p number and press Enter. The variable product_id is the
product ID you received from the customer or the ART tool.
Log off all administration applications
When you have completed all the administration, log off all the applications used.
Disconnect from the media server
Disconnect the laptop from the media server.
On the active S8710 Media Server
Access the active media server
1 Clear the ARP cache on the laptop if necessary. (See Clear the ARP cache on the laptop on page
122 and return here.)
2 Connect to the active media server.
3 Log in. (See Access the media server on page 134 and return here.)