3 Migrating from an S8700 Media Server to an S8710 Media Server
On first S8710 Media Server
156 Migrating to the Avaya S8700 or S8710 Media Server
June 2004
Restore the security files
CAUTION:
You must restore S8700 Media Server 1 files to S8710 Media Server 1 and S8700 Media
Server 2 files to S8710 Media Server 2.
1 Under Data Backup/Restore, click View/Restore Data.
2 Select FTP; fill in the User Name, Password, Host Name (must use host IP address), and
Directory fields for the location of the Security files.
3 Click View.
4 Select the correct security (security_) file (the most recent one is at the top) and both force
options.
5 Click Restore.
If the backup version is a mismatch, click Force Restore.
6 Click Restore History and select desired file.
7 Click Status to view the Restore status. When the restoration is complete, the following message
displays:
Backup: 0: Restore of <filepath/filename> is completed successfully.
NOTE:
The passwords for the S8710 Media Server are now the same as those on the S8700 Media
Server. You can use customer logins.
Restore the Linux migration backup files
CAUTION:
You must restore S8700 Media Server 1 files to S8710 Media Server 1 and S8700 Media
Server 2 files to S8710 Media Server 2.
CAUTION:
Restore must be run only once. Running restore more than once may corrupt the system
data. If a restore appears to have not completed, check the Backup History and Backup
Logs on the Maintenance Web Interface and check the system log through the Linux
command line interface. If all of these sources indicate that a restore has not completed,
you can safely rerun the restore.
1 Under Server Upgrades, click Linux Migration (Backup/Restore).
2 Select Initiate new backup or restore and click Submit
3 Under Restore Method, select FTP; fill in the User Name, Password, Host Name (must use
host IP address)
, and Directory fields for the location of the backup files.
4 Click Submit.
To Next Page
Loading...
