Installing Communication Manager software
40 Installing and Configuring the Avaya S8700 Series Media Server
Installing Avaya Communication Manager
!
CAUTION:
CAUTION: If after you open a Telnet session on the media server and you get a login
prompt, you may have a hard drive with software on it rather than a blank hard
drive. If that is the case, go to Remastering the hard drive
on page 50, then come
back to this step.
The following steps install Avaya Communication Manager on the media server.
Note:
Note: Use a telnet session to access the information on the CD.
1. Type telnet 192.11.13.6 and press Enter to view the first screen.
Note:
Note: To navigate on these screens, use the arrow keys to move to an option, then
press the space bar to select the option. Press Enter to submit the screen.
2. Select Install, make sure <OK> is highlighted, and press Enter.
To Next Page
Loading...
