Avaya S8700 Series - Page 59

Connecting to the IPSIs
Issue 4.1 June 2005 59
Figure 4: Avaya S8710 Media Server connectivity guide
Figure notes:
1. Eth0—to control network A (CNA) if
dedicated control network or to customer’s
network if nondedicated control network.
(straight-through CAT5 cable)
2. Eth1—to services laptop (cross-connect
CAT5 cable)
3. Eth2—to duplicated media server
(cross-connect CAT5 cable)
4. Eth3—to control network B (CNB) if
duplicated control network
(straight-through CAT5 cable)
5. Eth4—to customer’s network if dedicated
control network (straight-through CAT5
cable)
6. Eth5—unused
cadsnet2 KLC 043004
2
3
iLO
VDCI
DAL1 DUP MEMORY
RECEIVE MODE
LINC SYNC
TRANS MODE
LINC ACTIVE
1
2
3
133 MGz
100 MGz
100 MGz
UID
2 1
2
1
4
3
5
6
2 1