Avaya S8700 Series - Page 622

Migrating a DEFINITY Server CSI in a CMC to an S8700-Series Media Server with IP-PNC
622 Upgrading, Migrating, and Converting Media Servers and Gateways
For more information, see Migration paths on page 618.
When you migrate from a DEFINITY system, you must complete the following additional tasks
before you start the migration:
9
Task Description
Determine which adapters
and cables you can reuse.
You cannot reuse the following items:
● The C-LAN 259A adapter. You must use the
adapter to the IP Media Processor for 100-Mbps
speed.
● The CAT3 cable that is used with C-LAN. You
must use a CAT5 or better cable for 100-Mbps
speed.
CAUTION:
You must complete the following eight tasks before you freeze translations or save
translations to an MO disk that is used to read translations directly into a media
server.
Be sure to do this step
before freezing translations.
Verify that existing logins do
not start with a number or
an asterisk (*).
Linux does not support logins that start with a number
or an asterisk (*). Use Avaya Terminal Emulator or
Avaya Site Administration to perform a list logins
command.
Be sure to do this step
before freezing translations.
Verify that the functions of
the TN577 Packet Gateway
and the TN726B Data Line
circuit packs (BX.25 links
and mode two data
modules) were changed to
work through the C-LAN
circuit packs.
Note that you cannot reuse the TN577 circuit pack.
Use Avaya Terminal Emulator or Avaya Site
Administration to perform a list node-names
command.
1 of 4